LaserBond 100 Black Laser Marking Ink, Compatible with CO2 Fiber Diode and YAG Laser Engravers, Permanent Marks on Metal Glass Stone and Ceramic (125g)

Best Value – The smaller particle size of LaserBond 100 provides a greater surface area coverage and enables your laser to operate at faster speeds

Laser Compatibility – Our formula is compatible with CO2, Fiber, YAG, and Diode lasers, ensuring that you’ll always have the right tool for the job

How To Use – Shake the bottle vigorously for 1 – 2 minutes to insure uniform consistency. When adding the denatured alcohol, use a ratio of at least 1:1 when applying the product with a brush, or 2:1 when using an airbrush or spray gun. If you are using an airbrush/spray gun, spray about 10” – 12” from the substrate surface and apply a thin, even and smooth coating using a left-to-right, back-and-forth motion. Use the suggested laser settings that are included with the LaserBond 100 product

LaserBond 100 is the Original All-Purpose laser bonding material for producing permanent black marks on a variety of substrates including glass, ceramic, stone and metals such as stainless steel, brass, aluminum, copper, titanium, tin, nickel and many others.

LaserBond 100 All-Purpose Liquid Ink is a water-based concentrate and needs to be shaken vigorously for 1 – 2 minutes to insure that all ingredients are thoroughly mixed and then diluted with denatured alcohol by at least 1:1 for manual application using, preferably, a foam brush OR by at least 2:1 for application using an airbrush or spray gun and it is recommended that the spray be applied by holding the nozzle about 10” – 12” away from the surface and misting the LaserBond 100 directly onto it using a side-to-side motion.

Dilution ratios of up to 5:1 have proven to work successfully; however you should start with these lower dilution guidelines and increase the amount of denatured alcohol until a smooth and even coat is achieved. The dilution with denatured alcohol is important as it helps to break the surface tension and keeps the LaserBond 100 from beading up or separating/streaking on the substrate surface.